Municipal water company related personage introduction, in the old district pipe network transformation aspect, completes the 10 community transformation task before the end of November; Stands the pipe freeze protection heat preservation, by the end of November will complete the 8 community riser transformation and the antifreeze heat preservation; On the other hand, more than 800 external walls, more than 250 internal walls have been upgraded for antifreeze insulation, and 400 pipes for antifreeze insulation.
According to weather forecast, due to the influence of “La Niña†this winter, global temperatures will appear “extremely coldâ€. In order to cope with climate change, the municipal water company stepped up efforts to promote the protection of the water supply facilities for frost protection and thermal insulation, and provided water meters and water pipes with “clothes and hatsâ€; communicated with the property, completed wells for pipelines, closed the doors and windows of corridors, and checked the drains and pumping stations of pipeline wells. Replace damaged water meter covers. The Municipal Water Supply Company has formulated the “Winter Water Supply Cold and Frost Protection Contingency Plan†in the face of possible conditions to ensure timely, effective and rapid solutions to ensure residents' water safety in winter.
The municipal water company also reminded the public to do a good job of antifreeze insulation of their own water supply facilities. The specific operating methods are as follows:
Wearing a cap: For the water facilities exposed to outdoor water pipes, water meters, faucets, etc., cotton, linen, and plastic foam can be used for bandaging and insulation.
Close the window to protect against the cold: In the cold days, especially at night, close the balcony, kitchen, bathroom and all the windows facing the north room to ensure that the indoor temperature is above zero.
Dripping into the line: If the temperature is below -3°C, turn the tap off slightly in the evening to make the water flow into a line to ensure that tap water flows in the pipe and prevent freezing at night.
Water protection: Prepare for water storage at night.
Emptying facilities: The solar water heaters should be installed with anti-freezing drainage equipment to empty the antifreeze.
Emergency measures: For the frozen water pipes, if it is PP-R and PVC pipe, the user can use hot towel to apply on the water pipe and then use hot water to simmer and defrost. Do not use fire to bake directly or use hot water to scald. In order to avoid causing pipeline or water meter cracking. Faucet can not open the water, the correct way is to use about 30 degrees of hot and cold water along the exposed pipes poured two times, generally can use water. In particular, attention should be paid to the fact that hot water and hot water can not be used for water metering and can be tightly wrapped around bare water pipes or faucets with cotton or linen. Water meters in the water meter well box can be covered with grass bags, used clothes, etc.
(Original title: Water supply facilities in the old Nantong community have been stepped up to give water to the water meter.)
The guide wheel also includes the guide wheel; the guide wheel includes the guide wheel body and the accommodation space for the impeller; the one side of the guide wheel is equipped with a capacitive space; the guide wheel is set with several guide blades; several guide blades are arranged in the direction of the guide wheel in the direction of the guide wheel and two adjacent. The blade of the guide wheel is surrounded by the guide wheel as a guide runner; the outlet of the guide runner is arranged on the side of the guide body near the accommodation space and near the center of the body of the guide wheel; the inlet of the guide runner is set on the side wall of the guide wheel, and there are several impeller blades in the impeller; if the impeller blades are at the center of the impeller, the impeller is at the center of the impeller. The direction of the edge is set in the impeller; the adjacent impeller blades and the impeller are surrounded by the impeller flow path; the inlet of the impeller flow passage is set on the side of the impeller and is close to the center of the impeller; the impeller's exit is set on the side wall of the impeller; the impeller is set in the guide wheel, and the diversion groove is far away from the guide wheel; the entrance and guide of the impeller flow passage is made. The exit of the wheel is connected. Our company has become a supermarket for leaf guide and Submersible pump parts at home and abroad.
950series Impeller And Diffuser
950Series Impeller And Diffuser,Diffuser,Pump Impeller And Diffuser,Impeller Volute And Diffuser Interaction
Tianjin RongHeng Group LLC , https://www.wholesale-water-pump.com