There are many kinds of bugs caused by improper operation when using a garbage truck , but how can we avoid it? What is the avoidance method? These questions are all we need to consider, then the next step is to We will introduce how to avoid the malfunctions and faults caused by improper operations.
First, when using the garbage truck to carry out operations, it is forbidden to put construction garbage into the garbage truck because the construction garbage has a great degree of damage to the garbage truck to prevent mechanical damage.
Secondly, when it is found that the hydraulic system of the hanging garbage bin is malfunctioning and has problems, then it is necessary to stop the continuous operation and find professional maintenance personnel to perform professional inspections and exclusions so as to avoid causing greater losses. .
Third, when the one-way throttle valve of the bucket-type garbage truck has adjusted the speed of the hydraulic cylinder, it is not necessary to change it to avoid damage to the mechanical parts.
Fourth, when the garbage cans are poured into the garbage truck, they should not be raised or lowered quickly. The operator should operate the control system to make it lift up and down slowly. When carrying out maintenance or overhaul of the garbage truck, the safety facilities are also When you are ready, you will be able to support the poles for a while, so as to avoid unnecessary harm to your body due to your lack of attention.
Fifth, it is forbidden to pour water into the fuel tank when cleaning the hanging garbage truck. At the same time, it is also necessary to check the loss of hydraulic oil regularly. When it is depleted, it must be added in a timely manner, and the oil line of the engine should not be taken over where it seeps through. During the inspection and repair process, it is necessary to avoid collisions with the mechanical parts, so as to avoid deformation of the parts or scratches on the body.
The above is about the faults and faults caused by improper operations. We hope to help you. Only by understanding these things can we prevent this from happening. Also can let you become more familiar with what should be noticed during the driving process of the hanging garbage truck . When you understand the above mentioned faults, I believe that you will pay more attention to the maintenance and maintenance of your car.
5D Wheel Alignment With Tablet And TV also support multi-screens. The wheel alignment process can be shown on both TV and tablet, and they are synchronous. Besides, the user can use more screens such as computer and cell phone with android system. Wifi makes all data share and transmit. 5D Wheel Alignment With Tablet and TV is for car shops which hope to have more screens to see the measurement results. One TV and one tablet are always a good match.
Advantages of 5D Wheel Alignment with tablet and TV:
1.Without limitation of space,5D wheel alignment can be used on all kinds of lifts.
2. With 5 cameras, the reference plane is car body, so 5D wheel alignment can measure almost all kinds of vehicles, even if the vehicle is lifted.
3. 5D wheel alignment supports varied operation platforms, point to point transmission by WiFi can shied interference.
4. 5D wheel alignment is supported by powerful cloud service; 5D wheel alignment can connect to IPAD, cell phone, computer and the Internet, supporting remote operation and data upgrade.
5. Four targets are crash resistant and can be exchanged. Fix wheel claws without taking apart wheel hub cover.
6. 5D wheel alignment measurement range is wide, and it can also test wheel deviation besides all traditional parameters.
7. The optional one point wheel clamps can be installed within four seconds.
5D Wheel Alignment With Tablet And TV
5D Wheel Alignment With Tablet And TV,Save Space Wheel Alignment,Truck Wheel Alignment,Sucvary Wheel Alignment
Shenzhen Sucvary Tech Co., Ltd. , https://www.syalignment.com