Working principle and characteristics of road construction blower

During the construction of expressways, municipal construction and roads and bridges, the sweeping work on the surface of the construction subgrade can be completed by a road construction blower. Before the paver spreads oil, it is necessary to clean the road surface and there must be no debris such as gravel. In the past construction process, manual cleaning was performed. During the construction process, the operation intensity was large, the time was long, the efficiency was low, and the dust on the site was relatively large, and when the special conditions such as the tight schedule were encountered, the work could not be completed on time. Due to delays in the construction period, the economic loss is huge.

The working principle of the road construction purging machine is that the hydraulic motor drives the wire brush or the mixing brush to rotate at a high speed, throwing foreign objects such as stones and sand on the surface of the road foundation into the front bucket. After the bucket is full, it will fall on the outside of the highway. After the sweeping process is completed, a blow operation will be performed. Under the action of the high-power fan, the fine sand and dust remaining on the surface of the road bed can be blown clean. Through repeated tests, after this kind of road construction sweeper sweeping process, the cleanliness requirements of the oiled construction surface can be achieved at one time, which is the best choice for cleaning the construction road machinery! At the same time, this machine can also clean and blow the standard road surface with better results!

In the highway maintenance construction operation, the labor intensity and labor cost of traditional manual operations are greatly reduced, and the construction period is effectively shortened.

Second, the main features

1. Axis transmission: The shaft transmission oil pump is adopted. The transmission mode adopted by the engine and the transmission is to use a heavier transmission shaft to connect the transmission. The four-wheel drive has strong power.

2. Dust storage: The front design of the bucket is adopted to effectively recover the gravel and other raw materials on the road surface, and the raw materials can also be reused after being recycled.

3. Blowing: The design of the tuyere of the road construction blower is active, and it can realize any adjustment of height and angle, and the range of blowing can reach 360 degrees.

4, with a cab: sweeper in the construction process, dust is particularly large, all-sealed cab to avoid the driver contact with a lot of dust.

5. Cleaning: The cleaning roller drives the high-speed rotation through the hydraulic motor to realize the cleaning function, and the cleaning roller is easy to disassemble and install. It can realize the replacement of the whole group and the single-piece brush, which is convenient and quick.

6. Multifunctional: Optional milling and pulling device can realize the milling and pulling function of the road surface, and can assemble pushes, forks, shovels, grabs, drills and other appliances to realize snow pushing, snow sweeping, bulldozing, and forklifts. Loading, grabbing, drilling, etc., a multi-purpose machine.

Intergrated Design Batch Waste Plastic Pyrolysis Plant

Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.

Flowchat of Batch Waste Tyre Pyrolysis Plant

 

Advantages of Batch Waste Tyre Pyrolysis Plant

 

1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.

2.  Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.

3.  National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.

4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.

5.  Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.

6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.

7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.

8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.

 

Technical Parameter of Batch Waste Tyre Pyrolysis Plant

NO.	ITEM	PROJECT
1	Equipment Model	XY-7	XY-8
2	Door Model	Full Open Door	Full Open Door
3	Suitable Raw Materials	Rubber/Plastic Products	Rubber/Plastic Products
4	Structure	Horizontal Type Revolves	Horizontal Type Revolves
5	Reactor Size	Φ2200*6000mm  Î¦2600*6600mm	Φ2200*6000mm  Î¦2600*6600mm
6	Capacity for One Batch	5-6Mt; 8-10Mt	5-6Mt; 8-10Mt
7	Oil Yield of Tires	40%-45%	40%-45%
8	Work Pressure	Normal Pressure	Normal Pressure
9	Reactor Rotation Speed	0.4R/M	0.4R/M
10	Fuels Choice	Coal, Wood	Coal, Wood, Gas, Oil
11	Power	18KW/H	18-25KW/H
12	Cooling Method	Water Cycling	Water Cycling
13	Type of Drive	External Annular Gear	External Annular Gear
14	Heating Method	Direct	Direct
15	Type of Installation	With Foundation	With Foundation/Integrated Base
16	Noise dB(A)	≦85	≦85
17	Operation Mode	Intermittent Operation	Intermittent Operation
18	Total Weight(MT)	25-40	25-40
19	Installation Space Required	30m*10m	30m*10m
20	Manpower	3~4/batch	3~4/batch
21	Shipment	Ф2200×6000=1*40HC+1*40FR Ф2600×6600=2*40HC+1*40FR	Ф2200×6000=1*40HC+1*40FR Ф2600×6600=2*40HC+1*40FR

 

Integrated Design Batch Waste Plastic Pyrolysis Plant

Intergrated Design Batch Waste Plastic Pyrolysis Plant,Waste Plastic Pyrolysis Plant,Rubber Pyrolysis Recycling Plant

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com