The parents who read the title know what type of special car is Xiaobian to write? "Catch the dust," this idiom is very good analysis, verbs - catch, nouns - dust. So what we have to say is a special-purpose vehicle that can reduce the dust in the air, a multi-functional dust- reducing vehicle .
A few days ago, many cities used the multi-functional dust suppression car as the killer of dust. Invited by this killer to create fresh air for the public, through the operation of multi-functional dust suppression vehicles, PM2.5 and PM10 in the air has a good removal, inhibition, and because it does not assemble the auxiliary engine, to avoid the work environment Secondary pollution.
The effect is obvious, spraying more than 30 meters "to catch dust"
The appearance of the multifunctional dust suppression car is similar to that of an ordinary sprinkler, but as you approach it, you can discover that it has the function that the general sprinkler does not have. It is mounted on the top of the car with a row of matrix lifting racks. A row of nozzles, up to 26, is installed around the perimeter, making it feel like a fountain when working. The most nimble technology should belong to the car has a full computer integrated control touch screen, as long as the user gently click on the interface, the shelf of the sprinkler will slowly rise, and can make all the jet height of nearly 10 meters. As the "command" of the sprinkler starts, the mixed solution of highly efficient wetting agent and water in the car box is actively transported upward through the water pipe wound on the support and is ejected by 26 sprayers.
Of course, we must also use a multi-functional dust suppression vehicle to treat water and highly effective wetting agents through a special pressure treatment of the atomization system to create ultra-micro mists. These water mists are only 50 micrometers in size and are smaller than the hair. These tiny water mists are sprayed into the air. Dust, PM2.5 particles, etc. are affected by the water mist and they are cleaned with the mist and slowly sink to the ground.
A multi-pronged approach to building air quality defenses
Many people think that it has 26 sprinkler heads, so it feels a waste of water resources to a certain extent, but you do not know, in fact, the efficient wetting agent in the car tank will be more economical than the traditional flushing and dust control method after the mixed solution with water. With water, it also saves labor costs.
The multi-functional dust suppression car can also be used to suppress local dust in the process of urban demolition and in mines, mining areas, and sand fields. In addition, the car also comes with a 100-kilowatt generator that can provide power to the car body. Emergency power supply to a sudden power outage in a community or shopping mall.
Shutter Door Roll Forming Machine
The shutter door machine has many type of design. The austrilia type use wide raw material width, and easy to make the door. The small type of shutter door strip has nice appearance, and durable product. Besides, there are some other type of shutter door machine, like anti-wind shutter door machine and fire proof shutter door machine. The fire proof shutter door machine has the steel frame with EPS inside.
TECHNICAL SPECIFICATION
(1) 5 tons hydraulic un-coiler:
Hydraulic motor drives. One single-head structure. It has a pressing arm to prevent the coil loose.
Electric uncoiling, hydraulic motor tenses the coil inner.
The max. coil inner-diameter is 508mm.
The max. coil outter-diameter is 1200mm.
The max. width of coil is 1250mm.
The max. capacity is 5 tons.
(2) Roll-Forming M/C:
Welded steel structure base, chains transmit, motor drives it. The machine include the filming device .
The roller is designed by Germany software COPRA, and has FEA analysis, which can promise the product precision.
Material of Roller: 45#, with hard chrome coated, polishing,
Voltage:380V/50Hz
(3) Hydraulic pressing/ Cutting:
Stop to press, Stop to cut, Post cut .Cutting tool material: Cr12, pressing tool material:40Cr.
Tolerance of the cutting length ±2mm.
(4) Product Rack
It is 2 parts, 6 meters total.
Un-powered.
(5) Hydraulic System:
It offers power for the cutter.
(6) Electrical System:
It uses Siemens PLC system to control the whole line. It can measure and cut the length automatically. Frequency adjusts the speed and it has the self-control speed function.
Human-machine screen, touch screen control. The length can be set in touch screen freely and operation is simple.
The surround connecting wires adopts aviation socket or fast-speed plug.
(7) Safety barrier system
Keep the workers safe when working.
Shutter Door Roll Forming Machine
Shutter Door Roll Forming Machine,Anti-Wind Shutter Door Roll Forming Machine,Anti-Wind Shutter Door Forming Machine,Garage Door Roll Forming Machine
Botou Xianfa Roll Forming Machine Factory , http://www.rollformingmachinecn.com