Car punctures are a big headache for drivers. If you puncture tyres at high speed, it is very easy to threaten the lives of people in the car because of the speed. Compression garbage truck has a compression function and it has a large load after compression. If it is operated improperly, it can easily lead to a puncture accident.
General puncture is roughly two reasons: too low tire pressure or tire air is too full, if the tire pressure is insufficient, the sidewall of the garbage truck will bend and cause puncture. If it is inflated, the tire leaks due to improper operation, resulting in a low tire inner tire pressure, which can easily lead to puncture. Tyre pressure is too high and it is easy to cause cracks in the tire's defects. This is more common in hot summer weather or when traveling for a long time.
Municipal sanitation garbage truck drivers should select the appropriate speed grade quality tires according to different forms of speed. At the same time, they should always pay attention to checking the tire's production date. If it is found that it has exceeded the service life, it should be promptly replaced. If tread damage is found, Should be replaced promptly. Select tires should be selected as high-temperature resistant, friction-free tires with better explosion-proof performance. Garbage truck drivers should be as far away as possible from the road grates on the road when they are parked, otherwise it is very easy to cause damage to the side walls of garbage truck tires, and even cause damage to the tire rims.
When picking up garbage truck tires, pay attention to the tire tread pattern. The pattern is not only of ornamental value, but also has a great impact on the performance of the tire. Garbage trucks traveling in cities should use tires with a smaller pattern to reduce noise. If there are long-distance vehicles that can choose larger tires, consider high-end brands such as Michelin tires, but also pay attention to the drainage performance of the tires, avoid water bloom phenomenon on the highway. If the garbage truck's handling performance is not very good, Xiao Bian recommends replacing the flat tire with a lower ratio. For many vehicles, if you want to improve the handling performance, it is a good method to replace the flat tire with a relatively low ratio. In addition, if there is a problem with the tire, please contact the garbage truck manufacturer in time.
The above is a brief introduction of Xiao Bian's selection of garbage truck tires. If there are still problems, we can contact our staff. (Wen/Jun Xun)
Specifications
1)Suitable for conveyance of gas, petroleum, fluid, and electricity
2)Seamless,SAW or ERW alloy Steel Pipe
THK <3"; OD <120"
A: Alloy Pipe and tube Size Range:
1) Round pipe diameter: 4mm-3000mm, thickness: 0.3-60.0mm
2) Square tube: 8 x 8mm-1000 x 1000mm, thickness: 0.4-60.0mm
3) Rectangle tube: 8x 10mm-800 x 500mm, thickness: 0.4-60.0mm
B: Surface finish: black, blank, bright and galvanized, or painted
C: Length of each pipe: 500mm-16,000mm
D: Steel grade: 10#, 20#, A106B, A53B, Q195 Q235, Q345, ST37-2, ST52, S235, S355, SS400, A1010, SAE1045, X40, X60, A312, 304, 316 etc
E: Conforms to international standards, like: ASTM A53, ASTM A500, ASTM A513, ASTM A312, BS1387, DIN2391, DIN2394, DIN17175, JIS G3452, EN10210, EN10219, EN10025, EN10305 etc
Steel Pipe
ERW Steel Pipe, Square Steel Pipe, LSAW Steel Pipe, SSAW Steel Pipe
Cangzhou Weiheng Pipe Industry Co.,Ltd , http://www.czweiheng.com