(1) Before the no-load operation and the precautions for the test.
1) Turn the vertical axis to check if any foreign objects are stuck;
2) Check whether the slurry level adjustment device is flexible;
3) Check the amount of oil at each lubrication point;
4) Check whether the vertical axis and the number of squeegee rotations meet the design requirements;
5) The tank body is filled with water for leak test;
6) Filled with clean water test, continuous operation for 2h, no card touch; bearing temperature rise does not exceed 40 to 50 degrees.
(2) For 4 hours of load test operation, the slurry concentration, ore supply, air volume, and matching of the chemicals should meet the process requirements.
(3) Normal operation.
Corrugated And Trapezoidal Roll Forming Machine: one layer makes corrugated panel, one layer makes IBR panel. And when the up layer is working, the down layer stops. Two layers can not work at the same time. It is used widly to roof and wall. Double metal roofing forming machine or double deck roll forming machine is a name for that.
Corrugated And Trapezoidal Roll Forming Machine
Corrugated Roof Sheet Double Deck Roll Forming Machine,Ibr Roof Sheet Double Deck Roll Forming Machine,Ibr Double Deck Forming Machine,Water Wave Double Deck Forming Machine
Xianfa Roll Forming Machine Factory , https://www.btxianfa.com