Take you to operate DF-4 Electromagnetic Ore Sample Mill
First, DF-4 electromagnetic ore crusher overview
DF-4 Electromagnetic Ore Sample Mill uses electromagnetic vibration principle to directly drive the vibrating tube to hit the crushed material at high speed ( 3000 times /min ). It has the advantages of high efficiency, small size, light weight, no noise, no dust, etc. A new type of high-efficiency sample preparation tool that can replace various sample preparation pulverizers ( and various types of mortars ) to quickly prepare analytical samples and is widely applicable to laboratories in various industries such as mining, building materials, cement, metallurgy, chemical engineering, coal, and foodstuffs. . Especially for the preparation of fly ash samples from thermal power plants.
Second, DF-4 Electromagnetic Ore Sample Mill Operation Process
l . Put the tube into the cup and place the small one down.
2 , into the sample, iron powder, limestone, slag, clinker, quartz stone, clay to about 6Og the best. Coal to about 40g best, small size is 15 ~ 20g.
3 , cover the lid on the cup, pay attention to the O -ring seal on the lid is good.
4 , put the cup into the host and then put down the pressure bar, hand-screw the nut, and pay attention to the nut under the gasket.
5. Tighten the nut with a wrench and close the cover. Open the switch. Turn the timer to 2 minutes and the machine starts to work.
6. When the machine stops working for a predetermined time, the switch can be closed, the cover can be opened, the nut can be loosened, and the material cup can be taken out with gloves. After the material cup is taken out, place the cup cover in the corner of the sample tray to make the test. Samples are poured into the sample tray together with the feed tube.
7, with the tube clamped crucible pliers, wrench other hand slap tube, on the back and beat several times, i.e., most of the samples fall within the tray.
8. Brush the remaining sample further with a brush.
9 , if due to the sample moisture or other reasons cause the inner wall of the material cup to stick, you can use a special shovel to shovel
Rotary Damper is mainly aimed at damping control of the motion of some parts in the direction of rotation, ensure that the rotary motion is achieved in soft, silent and safe environment. Rotary damper according to the rotation angle, rotary damper can be divided into more than 360 degrees circular rotation angle and limit rotation angle. Different types according to the installation type of the product, rotary damper can be divided into Barrel Damper, Vane Damper, stop damper, Gear Damper , Disk Damper and Shaft Damper etc. ABD rotary dampers are used to dampen drives, control speed, and many other applications.
Our rotary dampers are widely used in automobile interior decoration, household electric appliances, furniture, invisible screens, theater seats and bathroom products, etc. ABD damper is conducive to performing structural movement in soft, silent and safe environment, mitigating impact load, avoiding strike damage, prolonging mechanical life, reducing noise disturbance, improving product quality and improve customer satisfaction.
Full inspection of all our products torque , guarantee the stability of the product torque. The company's salesmen after years of working in the market, ensuring the timeliness of feedback and customer service. Our company has a leading R & D team in the peer, our product has several patents, ensuring a steady stream of new product development for the company. At present, our company developed products are the first to peer object of imitation.
If you have any questions, please contact with us directly and we have the perfect after-sales service and technical support. We look forward to working with you side by side, to be a long-term partner whom you can trust.
Rotary Damper
Rotary Damper,Friction Rotary Dampers,Small Rotary Dampers,Large Rotary Dampers
Shenzhen ABD Equipment Co., Ltd. , http://www.abddamper.com