In the actual cutting process, when the stainless steel thin plate or the large-format thick plate is cut, the plate surface may be deformed, resulting in a situation where the collision and fire cutting accuracy is not performed. At this time, in order to improve the cutting accuracy, it is necessary to ensure that the height of the torch and the surface of the plate is stable, but simply requiring manual control of the stable height of the cutting torch is not only a waste of time and energy, but also causes inaccurate control. For this reason, the introduction of automatic height adjustment system can be solved.
The auto-tuning system can be divided into two types: automatic capacitance increase and arc voltage auto-adjustment. Usually, the flame cutting mode configures the capacitance to automatically increase; the plasma cutting mode configures the arc voltage to automatically increase. Because the electromagnetic interference is very large during plasma cutting, the capacitance-adjustment system will fail; and the arc voltage will increase depending on the arc, and the flame cutting will not cause an arc.
The design principle of capacitance height-up is to detect the capacitance value between the induction ring and the steel plate to be cut in real time, and to ensure that the capacitance value is constant through the automatic lifting of the torch to ensure that the distance between the cutting nozzle and the steel plate to be cut is constant. The capacitive height tracking system uses the gap capacitance between the tip of the robot or automatic welding equipment and the workpiece to detect the distance between the workpiece and dynamically adjust the height of the robot.
Capacitor auto-adjustment has the advantages of small size, easy installation, easy to attach to any robot or automatic welding equipment, strong anti-interference, anti-drift and anti-temperature sensitivity, and stable operation in harsh working sites. Capacitive height tracking system draws on foreign technology and has breakthroughs in key technologies such as anti-jamming, drift and temperature compensation for weak signals, which greatly improves the performance of the system. Height control accuracy ±0.5mm.
Chinese cutting machine trading network, allowing you to buy the rest assured! A variety of CNC cutting machine and CNC cutting equipment, a variety of cutting machine models, let the optional! Official website: /
Concrete Pile Spinning/Centrifugal Machine:
Concrete Pile Spinning/Centrifugal Machine is mainly apply to produce High strength centrifugal technology concrete spun piles of difference diameter and length, Prestressed Reinforced concrete pole(SPC pole) by spinning formed. According to customer's effeciency request, there are Single wheel spinning machine and Double wheel spinning machine at customer's option, it is equipped with a stepless speed-variation motor and a control panel, it works smoothly and its speeder is of wide-range. Its box base is sturdy and durable and easy for installation.
Our Pile Spinning Machine's Advantages:
1. Unique "slot" design, change the screw limit between the bearing support and the base plate with the card slot and bolt limit. Both up and down sides of the spinning machine panel, undersurface and two sides of bearing support go through fine machining. Though the process is complex, it makes it more solid during high-frequency vibration of bearing support and the floor. Repair and replacement also have interchangeability.
2. Connection shaft is whole shaft, to avoid stress concentration brought by shaft diameter changes, resulting in the phenomenon of "shaft-broken".
3. The limit side of the support wheel is removable. It is convenient for users to replace.
4. Frequency-conversion cabinet of spinning machine records process parameter of each pipe and output reports, provides the office computer data communication interface.
Spinning Machine Technical Parameter:
|
Wheel Distance(mm) |
2000 |
|
Central wheel Distance(mm) |
950-1200 |
|
Wheel Diameteri(mm) |
600 |
|
Axle Diameter(mm) |
110-125 |
|
Automatic controller for centrifugal concrete pile machine |
|
We can Customize for you. If you have any questions, please contact with us. Welcome you can visit our Factory.For inqury,Please send mail directly to us.
Concrete Pile Spinning Machine
Concrete Spinning Machine,Spun Pile Centrifugal Machine,Concrete Pile Spinning Machine,Pole Spinning Machine
Jiangsu Haiheng Building-Materials Machinery Co.,Ltd , http://www.jshaiheng.com