As the country has increased its support for agricultural and rural development, agricultural modernization of large-scale mechanical operations is advancing in full swing. Weichai has firmly grasped the new trend of China's agricultural modernization for the huge demand for agricultural machinery and strived to strengthen its layout in the field of agricultural equipment. In 2014, Weichai established an agricultural equipment power sales company and launched a unique power of agricultural equipment - WP4 , to fully enter the field of agricultural equipment power!
Weichai Power WP4 light machine
WP4 series products have mature European agricultural equipment power lineage. Weichai is relying on Weichai's “smart power†platform based on the introduction, digestion, and absorption of advanced technology. It leverages the Group’s powerful R&D resources and according to the power reserve of China’s agricultural equipment power. Large-scale, high reliability, good environmental adaptability and other requirements, the development of tractor and harvesting machinery dedicated power, product coverage 80-160 horsepower, the use of mechanical pump + booster / booster intercooling technology, and a mature three-phase technology reserves (Electric control high pressure common rail + booster cooling technology), with strong power, economical fuel economy, reliability and high efficiency.
Weichai agricultural equipment power WP4 Pentium in the field of hope
Powerful: WP4 adopts low-speed technology, featuring low-speed torque, good acceleration performance, maximum torque of up to 600N·m, torque reserve rate of up to 30%, and can meet the needs of farming and crop harvesting in different regions. Improve the operational efficiency of agricultural machinery.
Economical fuel economy: Weichai major agricultural machinery manufacturers in the United Nations, according to actual conditions in various places, through a large number of actual tests and tests, targeted to optimize the matching of WP4 tractors and harvesting machinery and development, through the powertrain match Technology, to maximize the economic zone of the engine's minimum fuel consumption, so that the engine runs longer in the low fuel consumption area, so that the overall working efficiency to achieve the best, so as to achieve the engine's superior fuel economy.
Reliable and high-efficiency: WP4 adopts a gantry type body structure, the whole machine is rigid and well adapted to the harsh environmental requirements of agricultural machinery; the unique 93 dust filter is configured so that the whole machine can adapt to various adverse operating environments, and the pre-filtering effect is achieved. More than 93%, effectively extend the main filter maintenance cycle, effectively eliminate engine wear; standard water removal filter, completely eliminate the fuel in the water, impurities, significantly reduce the fuel system failure rate, in addition to water efficiency of more than 98%, effectively reduce High-pressure oil pump, injector failure rate; The use of secondary balance mechanism, effectively reduce the body vibration, reduce noise. After a severe test of high temperature, high altitude and cold, it is suitable for various harsh environmental challenges, with good cold start performance, smooth start at -15°C, good plateau adaptability, and no power loss at an altitude of 4,000 meters.
Chromium Carbide Overlay Plate
Austenitic alloys with up to about 0.7 % carbon and 20-30 % alloy (usually about equal parts of manganese and chrome with some nickel) provide stable austenite; even on carbon in high dilution situations, and low alloy steels. This makes them a much better choice than the austenitic manganese alloys for overlay on carbon and low alloy steels.
Well-designed austenitic surfacing alloys are extremely tough, ductile and work-hardenable. They offer excellent impact resistance but very low abrasion resistance (with little improvement as work-hardens) and have no relief checks.
These alloys will normally work-harden to a nominal surface hardness up to 50Rc and although this improves their abrasion resistance they still retain their good impact resistance. The austenitic surfacing deposits like the austenitic manganese base metals (see Base Materials) should not be exposed for extended periods to temperatures over 500°F (260 °C). This is to minimize embrittle.
HP Wear Plate is a kind of Compound Steel Plate consisting of a low carbon or alloyed steel base plate and a layer of wear resistant deposit.
The low carbon steel base plate makes Clad Plate to be welded, bolted or studded to existing structures, while the hard facing provides the premier wear-resistant surface capable of working in all applicable service conditions at either ambient or elevated temperatures.
Due to its excellent properties, HP CCO Plate works for long-lasting service life and superb performance, which are well applied to the industries like Cement Plant, Steel Mill, Mining Site, Power Generation, Construction where needs combat with abrasion.
UP Wear Resistant Plate, Vautid Wear Resistant Steel Plate,WA Wear Resistant Plate, Triten Wear Steel Plate
HuiFeng Wear Resistant Group , https://www.hpwearsolution.com