The electric stacker is a lifting device for high-altitude operation. It can perform aerial work across obstacles. When the platform is lifted to any position, it can be operated while walking. The structure is compact and the steering is flexible. The width of its site can ensure that the equipment enters a narrow space. Access and crowded work areas. Backup power unit, can reset the working platform, convenient transportation, can be towed to any place. Easy-to-recognize operator panel, multiple mechanical, electrical and hydraulic safety protection, advanced integrated hydraulics integrated system. It is suitable for all kinds of rugged landforms in the field and has a wide range of operation. It is mainly used for construction, bridge construction, shipbuilding, airports, mines, harbors, construction of communication and power facilities, and construction machinery for outdoor advertising. The electric stacker is easy to move, the folding arm structure is compact, the new high-quality steel is used, the strength is high, the weight is light, the AC power is directly connected or the DC power source is used to start it, and the erection speed is fast. The table can be raised and extended horizontally. It is ideal for high-altitude operations because it can be rotated and easily reached obstacles to reach the working position.
Electric stacker battery charging note: 1, electric stacker charging should be in a well-ventilated place, open the lid or remove the battery from the electric stacker; 2, never allow the electric stacker car battery exposed Open flame, the formation of explosive gas may cause fire; 3, the electric stacker battery must not be temporarily connected or wrong wiring; 4, electric stacker terminal must be tightened and can not be peeled off, cable insulation must be reliable; 5, electric reactor High-vehicle batteries should be kept clean and dry. Use anti-static cloth to remove dust. 6. Do not place tools or other metal objects on the battery of the electric stacker. 7. The temperature of the battery of the electric stacker during charging must not exceed 45°C. 8, the end of charge to check the electric stacker battery electrolyte level, should be higher than the partition 15mm, under normal circumstances, generally one week to make a refill of distilled water; 9, avoid skin and electric stacker battery acid contact , Contact with a lot of soapy water or consult a doctor; 10, waste batteries of electric stacker should be handled according to local regulations.
Maintenance of electric stacker chain components: 1. Maintenance of electric electric stacker, Maintenance of electric stacker is the most important loop in the use of stacker, generally under (full/half) electric stack height After one week of running the vehicle, it is necessary to conduct a routine maintenance. The efficiency and lifespan of the (full/half) electric stacker. 2. Maintenance of the electric stacker. The main loop in the use of the stacker. One week after the (full/half) electric stacker is operated, a routine maintenance is required. The efficiency, life and safety of the (full/half) electric stacker depends on daily maintenance.
Safety rules for maintenance work: (1) Keep the maintenance site clean and hygienic. (2) Do not bring any loose items or valuables on the body during maintenance. When repairing (all/half) electric stacker electrical systems, short-circuiting or burning may occur if the metal contacts the powered electronic components. So, take off your watch, earrings or other accessories. (3) Before (full/half) electric stacker maintenance, unplug the power outlet and disconnect the power supply. (4) The key switch of the (full/half) electric stacker shall be closed before opening the left and right covers or electrical systems. (5) Before checking the hydraulic system, lower the fork and release the system pressure. (6) When checking the oil leakage condition of the body, wipe it with paper or cardboard, and do not touch it directly with your hands. To avoid burns. (7) Please note that the oil temperature in the transmission or hydraulic system may be high. Then replace the gear oil or hydraulic oil to prevent combustion of the oil due to the high oil temperature. (8) The hydraulic system should be filled with new clean oil. If the hydraulic oil is not clean, it will affect the precision hydraulic components, so that the entire hydraulic system capacity is reduced. If different brands of hydraulic oil are used, damage to the hydraulic components will also affect the system capacity. Therefore, when adding or replacing hydraulic fluid, pay attention to the use of a unified grade. (9) Observe the relevant laws and regulations, protect the environment, store and discharge the oil according to regulations, and do not discharge it to the sewer. (10) Car body welding, to disconnect the battery power. Because welding current may enter the battery during welding, to avoid this kind of situation, please cut off the battery.
Maintenance of the motor: (1) In order to ensure the battery life, the battery should be fully charged before being put into use, and the battery with insufficient charge cannot be used. (2) The battery should not be overcharged or overdisposed. Overcharging and overdischarging the battery can seriously affect battery performance and life. (3) The battery fluid plugs and gas caps should be kept clean, removed or opened during charging, and should be installed or closed after charging. The battery surface, connecting wires and screws should be kept clean and dry. If there is sulphuric acid, wipe it off with cotton gauze. Care should be taken not to allow lye to enter the cell. (4) After the charging is completed, check the battery level and add distilled water in time to maintain the liquid level. Do not add dilute sulfuric acid under normal conditions. (5) After the battery is used, it should be charged in a timely manner, and the storage time should not exceed 24 hours. (6) Good ventilation should be maintained during charging. Fireworks are strictly prohibited. (7) In the following cases, the battery needs to be charged evenly. a. Normally used batteries are charged every 3 months. b. Lay unused batteries for a long time. c. There is a “backward battery†in the battery pack (backward battery refers to a battery whose voltage value is lower than that of other batteries or has been overhauled during charge and discharge). At this time, the equalization charge is performed only for the backward battery. (8) Balanced charging method. a, first ordinary charge. b, stop charging for 1 hour when charged to a fully charged state, and then charge with 0.25I5 for 1 hour. c. Press b to repeat several times until the charger is turned on. There will be intense bubbles in the battery. (9) When the battery is not in use, one month after the storage period expires, it is necessary to perform a supplementary charge according to the normal charging method. (10) The battery should be kept away from direct sunlight and the distance from the heat source should not be less than 2M. (11) Avoid contact with any liquids and harmful substances. Any metal impurities must not fall into the battery.
The maintenance of electric stackers is the main loop in the use of stackers. Under normal circumstances, one (week/half) electric stacker is to be used for routine maintenance (full/half). The efficiency, life, and safety of electric stackers depend on day-to-day maintenance.
The (full/half) electric stacker is to be repaired and replacement parts should be provided by the company to ensure quality. It is advisable to contact our after-sales service department. In order to make your (full/half) electric stacker safer and more economical.
Plain Puzzle Mat is a simple and easy EVA Puzzle Mat, made from superior EVA foam material helps multisensory stimulation and color training for children by entertaining way. A fun and high-quality foam puzzle mat is suitable for playground, bed room, daycare center, and kindergarten.
Guaranteed to keep your child entertained endlessly, protects your floor, great as a comfortable puzzle mat for exercise. You can always add as many tiles you'd like to your collection to make for more creative and exciting fun or try one of our other popular packages to add more to your collection. It's safe, soft, comfortable, colorful and flexible. Ideal for kids of all ages, let your infant rest on it without worrying about the mess.
Plain Puzzle Mat,Baby Play Mat,Baby Puzzle Mats,Kids Puzzle Mat,Plain Yoga Mat,Puzzle Play Mat
Huizhou City Melors Plastic Products Co., Limited , https://www.melorsfoam.com