I. INTRODUCTION A variety of automated instruments, computers, and corresponding actuators are used in production process monitoring and control. The signals in the process range from small signals as small as millivolts to large signals as large as tens of volts, and even signals as high as several thousand volts and hundreds of amps have to be processed. From the frequency point of view, there are DC low-frequency range, there are high-frequency / pulse spikes. Mutual interference between equipment and instruments becomes a problem that must be solved in system debugging. In addition to electromagnetic shielding, solving the "ground" of various equipment meters, that is, the potential difference of signal reference points, will become an important issue. Because the signals of different equipments and meters need to be transmitted and sent to each other, there is a signal reference point problem. In other words, for the complete transmission of signals, ideally the signals of all equipment meters have a common reference point, ie the potential difference between the reference points of all equipment meter signals is “zeroâ€. However, in the actual environment, this is almost impossible. In addition to the voltage drop caused by the wiring resistance between the “grounds†of the various equipment meters, there are various types of equipment meters that suffer from different interference in different environments. As well as wire contact points subjected to wind and rain leading to a drop in the quality of contacts and many other factors, resulting in a difference between each "ground".
Industrial field instrumentation In the industrial production process control system, it is necessary to monitor the electrical signals transmitted by the front-end sensors, and also transmit the processed signals to the control center host. In order to ensure the reliability and stability of the signal transmission, it is necessary to consider the signal ports. Isolated processing to eliminate the problem of ground potential difference after the meter is connected to the system.
Second, the general composition of industrial field instruments.
Industrial field instrumentation is applied to the industrial production process control system. Its role is to sample the on-site sensor signal, calculate the sampled value according to a preset algorithm to obtain the value of the monitored physical quantity at the actual site, and communicate the actual field physical status to the communication bus or The 4~20mA current signal is output to the main control center. The sensor signal is input to the industrial instrumentation. The first is the EMC protection circuit. Because the electrical environment at the industrial site is complex, there are strong electrical equipment and high-frequency switching equipment. These equipments will start and stop when they move. Larger surges and spikes are generated. This type of interference contains relatively large amounts of energy. Such interference is absorbed by EMC protection devices such as varistors, TVS tubes, and other devices to protect subsequent circuits from such interference. Cause damage. After the sensor signal is passed through the EMC protection circuit, the isolation amplifier input to the input terminal performs signal isolation and conditioning. The signal isolation can ensure that the internal circuit of the instrument and the external sensor form a ground line to block and eliminate common mode interference, thereby eliminating the ground line caused by the ground potential difference. Circulation, on the one hand, ensures that the sampling accuracy of the sensor signal is not affected by interference. On the one hand, it can protect the internal MCU system from damage caused by large common-mode voltages; the signal conditioning will convert the sensor through signal type conversion and signal amplification. The signal is linearly amplified to meet the signal type and range of the ADC sampling, to ensure that the signal range after conditioning and the input range of the ADC signal match to ensure the ADC sampling accuracy. The MCU digitally computes the digital signal after the ADC has been digitally quantized. After a series of operations such as digital filtering and linear operation, the MCU obtains the actual status of the physical quantity on the site and outputs it to the display panel. At the same time, the field physical value obtained is proportional to the linear ratio. Output to the DAC circuit, DAC circuit output voltage signal, in order to form a 4 ~ 20mA current signal, but also through the output side of the isolation amplifier to isolate the voltage signal conditioning into a 4 ~ 20mA current signal output. Of course, the signal output terminal also needs to design an EMC protection circuit.
Field Application Haiyan Jinhan Electronic Technology Co., Ltd. specializes in the production of FPD series DC isolated transmitter using ASIC chip (special thick film transmitter transmitter), super-linear voltage, current transformer and a full set of high-quality components, together with a full set of high-precision production equipment And computer check calibration system, in strict accordance with the international quality assurance system ISO 9001:2000 assembly production, full specifications, high taste, high degree of integration, work more reliable, with excellent temperature characteristics and long-term stability, good resistance to electric shock Performance and overload capabilities, high level of accuracy and linearity, are ideal third-generation power transmitters that do not require regular calibration and maintenance and are completely reliable. FP series transmitters meet the requirements of IEC, ANSI, BEAMA and other related standards and reach the advanced level of similar international products. FODH DC isolation is an instrument that converts a DC voltage or current signal in a linear scale into different DC voltage or current signals that are electrically isolated from each other. It can be used to measure generator rotor voltage and current, and it can be widely used in various other applications.
Spray Drying Machines are mainly used for drying various kinds of liquids such as emulsion, suspension, paste and solution. The finished products are in the shapes of powder or granule. Spray Dryers are manufactured for the specific products to be dried. They should accord with the specific requirements of products, such as finial residual moisture content, bulk density and particle size distribution.
Spray Drying Machines includes LPG Centrifugal Spray Dryers, ZPG Herbal Extract Spray Dryers, YPG Pressure Spray Dryers.
The LPG series spray dryer is mostly used for wide different indutries such as pharmaceutcial, foodstuff, chemical etc; ZPG series spray dryer is mostly used for pharmeceutcial industry to deal with herb and plant extract liquid. Compared to LPG series, it adds the wall cooling function, production cooling function and its spray tower is much bigger. The YPG series presssure dryer can get a relative bigger powder size and mostly used in chemical and food indstry.
Spray dryer is a kind of device that can simultaneously implement drying and pelleting simultaneously. According to the technological requirements, this spray drying machine can adjust the pressure and flow rate of the feeding pump as well as nozzle size, so as to get the required spherical particles with a certain proportion.
Features of Spray Drying Machines
1.With fast drying speed, the surface area of the liquid is greatly increased after atomization. In the hot airflow, our spray dryers can instantly evaporate 95%-98% moisture of materials, is especially suitable for drying heat sensitive materials. The drying time only takes a few seconds.
2.This spray drying machine has the good advantages of excellent uniformity, fluidity and solubility, high purity and superior quality. Our drying equipment has simple production process and easy operation and control.
3.Our spray dryers are able to dry the liquids with 40% to 60% moisture content (special materials can reach 90%) to powdery products at a time. The products after drying do not need to be crushed and screened, which can reduce the production process and improve product purity. The particle size, bulk density and moisture of the products can be adjusted by changing the operating conditions within a certain range.
Selection Notes for Customers
1.Name and physical property of the liquid: moisture content, viscosity, surface tension and PH value
2.Powder volume, allowable residual moisture content, granularity and allowable maximum temperature after drying
3.Output and working time per day
4.Available energy: vapor pressure availability, electric capacity, and the capacity of coal, oil and gas
5.Control requirement: whether the entrance and exit temperature should be controlled
6.Collecting powder requirements: whether to install the bag trap, environmental requirements for discharging the tail gas
Yutong Drying Equipment Co., Ltd. is a professional spray dryer manufacturer and supplier in China. Yutong carries out ISO9001 quality management system in order to ensure the quality of spray drying machines. With rapid development, we have already accumulated abundant capital and technology strength. Spray dryers are exported to America, Britain, Germany, Cyprus, Turkey, Greece, Ukraine, Malaysia, India, Vietnam, Thailand, Bangladesh, Singapore, Taiwan, Nigeria and Mexico.
Centrifugal Spray Dryers, Herbal Extract Spray Dryers, Pressure Spray Dryer Machines, Milk and Egg Spray Drying Machines, Cocoa Spray Dryers, Blood Spray Dryers
Jiangsu Yutong Drying Engineering Co.,Ltd , https://www.ytdryer.com