With the widespread popularity of garbage trucks in the country, from the earliest sealed garbage trucks to the diversification of today's removable containers, trash cans and other forms of existence. As a garbage truck with strong applicability, the compressed garbage truck has been widely recognized and designated for procurement. Such a garbage truck not only has the garbage collection function of the public garbage truck, but also effectively performs the first compression processing during the garbage collection process. To make the same car body volume, it can load more waste materials.
Today, the author will introduce the style and selection of garbage collection system for garbage trucks and introduce them in depth.
The garbage loading system for compressed garbage trucks is mainly divided into front loading type and rear loading type. Due to the front loading garbage system, the attached hydraulic lifting rack lifts the bin upside down, inevitably causing secondary pollution. Because the front-loading garbage system is used as a single supporting trash can, it is generally recognized by the majority of car users as "flashy design" and "brain-residual equipment."
The current garbage loading system for compacted garbage trucks is mainly concentrated on the rear-loading garbage system. For different operating environments, the rear-loading garbage system is mainly divided into two categories: garbage bucket and flip rack type.
Garbage bucket:
Rubbish bucket type: mainly relying on the form of hydraulic flip, the rubbish bucket is flipped and laid flat. After the artificial garbage is filled, the rubbish bin is inverted and dumped into the outer box body. The rubbish scraper collects the rubbish into the box body and smashes and compresses the rubbish bin. Store the rubbish and transport it for disposal.
Flip frame type:
Flip rack type: mainly equipped with a trash can turnover frame at the rear of the outer car body, supporting a plastic PVC trash can or an iron trash can, dumping the trash in the drum to the outer box body, and collecting garbage from the trash scraper into the box body. Crushing compresses rubbish and transports it for disposal.
The above two types of after-loading garbage systems have their own characteristics and are very effective for the actual operation needs of the localities. I believe that you can correctly purchase the garbage trucks that you really need from the above introduction.
Obligation to provide you with: hanging garbage trucks, 2 tons -15 tons compressed garbage trucks, 3 tons - 8 tons swing arm garbage trucks, garbage trucks and other garbage trucks and other data transmission and cost accounting quotation work.
Please call the sales department on 0722-7604999 . Professional sales staff will provide all the warm services for your car purchase.
To obtain perfect joins, inside of the solder ring copper fitting and the outside of the copper pipe are cleaned using coarse steel wool, flux paste is applied, the pipe is then inserted into the fitting and heat applied from a portable propane torch until a ring of solder shows at the edges of the fitting. Sizes we have available are from 8mm to 54mm For EN1254-1 and 1/2" to 2" for ASME B16.22 ,solder ring Copper Fittings,presolder copper fittings,yorkshire copper fittings,pegler copper fittings,connex copper fittings
solder ring copper fittings,presolder copper fittings,yorkshire copper fittings,pegler copper fittings,connex copper fittings
Taizhou Runde Company , https://www.zjcopperfittings.com