Heat pump technology is a new energy technology attracting worldwide attention in recent years. It is a device that transfers heat from a low-temperature heat source to a high-temperature heat source by consuming a part of high-grade energy. The heat transferred to the high temperature heat source includes the high grade energy consumed and the amount of heat absorbed from the low temperature heat source.
(B), air source heat pump hot water unit Air source heat pump water heater (unit) generally by the compressor, condenser, tank, expansion valve, evaporator and other components.
(C), air heat pump working principle Air heat pump at work, it consumes part of the energy itself, the energy stored in the air to be tapped, through the heat transfer medium circulation system to increase the temperature to use, and the entire heat pump device consumed Work is only a small part of the output power. Using heat pump technology can save a lot of high-grade energy.
In operation, the evaporator draws heat from the surrounding environment to evaporate the heat transfer medium, the working fluid vapor through the compressor temperature and pressure rise, the high temperature steam condenses into liquid through the condenser, the heat released to the storage tank Water. Condensed heat transfer medium through the expansion valve back to the evaporator, and then be evaporated, so cycle back and forth.
Second, the advantages of air-source heat pump in the traditional fermentation 1, energy-saving: air-source heat pump than the current traditional steam heating has energy-saving advantages.
2, environmental protection: air source heat pump no toxic and harmful combustion emissions, no greenhouse gas emissions. Noise in line with environmental requirements.
3, Security: microcomputer control, complete hydropower separation, no leakage risk, no poisoning, explosion danger.
4, can use the original site, technology, equipment, small footprint, light weight, removable.
5, the boiler failure, repair costs, the use of air-source heat pump after the fermentation part of the boiler does not use, can greatly reduce boiler operating costs.
6, air source heat pump existing power supply system that can meet the requirements, do not need to transform the line. Air source heat pump does not require steam, circulating water, the original water, steam pipe does not need to be repaired.
7, in line with national advocacy of energy saving policy.
Thus, air-source heat pump applications in the traditional fermentation has a good alternative value of energy saving, is a worthy development of new energy technologies.
Application Characteristics of Air Source Heat Pump in Traditional Fermentation Application of air source heat pump in traditional fermentation is the first of its kind in the field of traditional fermentation. It is an exploration of traditional fermentation energy. This technology has the advantages of less equipment investment, low energy consumption, convenient safety and environmental protection, Will open up a new revolution of traditional fermentation energy alternative.
China Pipe Nipple,Steel Pipe Nipple manufacture
Size: 1/2''~6''
Class Rating: 3000~6000
Facing: RF(raised face);FF(flat face);RTJ(ring type joint);RJ(ring joint face)
TG(tongue and groove face);MFM(male and female face)
Manufacturing process: Push, Press, Forge, Cast, etc.
Material:
Carbon steel:
ASTM A105;
ASTM A266 GR.1,GR.2,GR.3,GR.4
Stainless steel:
304/SUS304/UNS S30400/1.4301
304L/UNS S30403/1.4306;
304H/UNS S30409/1.4948;
309S/UNS S30908/1.4833
309H/UNS S30909;
310S/UNS S31008/1.4845;
310H/UNS S31009;
316/UNS S31600/1.4401;
316Ti/UNS S31635/1.4571;
316H/UNS S31609/1.4436;
316L/UNS S31603/1.4404;
316LN/UNS S31653;
317/UNS S31700;
317L/UNS S31703/1.4438;
321/UNS S32100/1.4541;
321H/UNS S32109;
347/UNS S34700/1.4550;
347H/UNS S34709/1.4912;
348/UNS S34800;
Alloy steel:
ASTM A694 F42/F46/F48/F50/F52/F56/F60/F65/F70;
ASTM A182 F5a/F5/F9/F11/F12/F22/F91;
ASTM A350 LF1/LF2/LF3;
Duplex steel:
ASTM A182 F51/S31803/1.4462;
ASTM A182 F53/S2507/S32750/1.4401;
ASTM A182 F55/S32760/1.4501/Zeron 100;
2205/F60/S32205;
ASTM A182 F44/S31254/254SMO/1.4547;
17-4PH/S17400/1.4542/SUS630/AISI630;
F904L/NO8904/1.4539;
725LN/310MoLN/S31050/1.4466
253MA/S30815/1.4835;
Nickel alloy steel:
Alloy 200/Nickel 200/NO2200/2.4066/ASTM B366 WPN;
Alloy 201/Nickel 201/NO2201/2.4068/ASTM B366 WPNL;
Alloy 400/Monel 400/NO4400/NS111/2.4360/ASTM B366 WPNC;
Alloy K-500/Monel K-500/NO5500/2.475;
Alloy 600/Inconel 600/NO6600/NS333/2.4816;
Alloy 601/Inconel 601/NO6001/2.4851;
Alloy 625/Inconel 625/NO6625/NS336/2.4856;
Alloy 718/Inconel 718/NO7718/GH169/GH4169/2.4668;
Alloy 800/Incoloy 800/NO8800/1.4876;
Alloy 800H/Incoloy 800H/NO8810/1.4958;
Alloy 800HT/Incoloy 800HT/NO8811/1.4959;
Alloy 825/Incoloy 825/NO8825/2.4858/NS142;
Alloy 925/Incoloy 925/NO9925;
Hastelloy C/Alloy C/NO6003/2.4869/NS333;
Alloy C-276/Hastelloy C-276/N10276/2.4819;
Alloy C-4/Hastelloy C-4/NO6455/NS335/2.4610;
Alloy C-22/Hastelloy C-22/NO6022/2.4602;
Alloy C-2000/Hastelloy C-2000/NO6200/2.4675;
Alloy B/Hastelloy B/NS321/N10001;
Alloy B-2/Hastelloy B-2/N10665/NS322/2.4617;
Alloy B-3/Hastelloy B-3/N10675/2.4600;
Alloy X/Hastelloy X/NO6002/2.4665;
Alloy G-30/Hastelloy G-30/NO6030/2.4603;
Alloy X-750/Inconel X-750/NO7750/GH145/2.4669;
Alloy 20/Carpenter 20Cb3/NO8020/NS312/2.4660;
Alloy 31/NO8031/1.4562;
Alloy 901/NO9901/1.4898;
Incoloy 25-6Mo/NO8926/1.4529/Incoloy 926/Alloy 926;
Inconel 783/UNS R30783;
NAS 254NM/NO8367;
Monel 30C
Nimonic 80A/Nickel Alloy 80a/UNS N07080/NA20/2.4631/2.4952
Nimonic 263/NO7263
Nimonic 90/UNS NO7090;
Incoloy 907/GH907;
Nitronic 60/Alloy 218/UNS S21800
SALES@GHSAILINGPIPE.COM
SALES@GHSAILINGPIPE.COM
Short section is a kind of fittings commonly used in industrial pipeline connection. There are common thread nipples, which are divided into two heads, outer silk, single head outer silk, flat head and outer silk, and some short joints with flanges.
The short section is divided into tubing short section and casing short section. The flanging short section in the pipe fittings is popular with the flange. The flange is set in the flanges, then the tail and the steel pipe are welded. At this time, the flange can be moved. As long as the flange is connected to the flange at any time, the flange can be connected.
The tubing short section is a short tubing. Compared with the tubing, it is only of different lengths and the others are the same. The lengths are: 0.25m, 0.5m, 1M, 1.5m, etc., which are used to match the downhole string.
Nipple
Pipe Nipple,Steel Pipe Nipple,Forged Nipple,Female Pipe Nipple
He Bei GuangHao Pipe Fittings Co .,LTD (Cangzhou Sailing Steel Pipe Co., Ltd) , https://www.guanghaofitting.com