Gouging Torch (QB) 600AÂ Â K-4000
Specifications:
1, Gouging torch is universally used for carbon electrodes. Used for arc-air gouging carbon electrodes. Maximum current is 600A-1200A.
Features:
1) Gouging torches: With monocable
2) Gouging carbon:
A) DC round gouging carbon: 3.2 - 19mm (diameter)
B) DC Rectangular gouging carbon:
I) Width: 10 - 25mm
Ii) Thickness: 4 - 6mm
C) Jointed gouging carbon: 8 - 19mm (diameter)
SERVICE
*Can make as per your samples or instailation size.
*Provide OEM Service and label service.
*Can pack as per your request.
*Can make the inner box and outer carton as your request.
Package:
Single Machine Dust Collector
The single machine Dust Collector (single bag dust collector and single machine Bag Filter) is specially designed for the roof and bottom of the cement plant. Design of belt conveying and dust removal from local dust source. It can also be used for dust removal in other industries. The utility model has the advantages of small volume, large air volume, compact structure, and convenient and reliable use.
Basic introduction
The single machine dust collector is the dust collector which can be operated by the wind pipe and the power supply. The dust collector is small in volume and does not need manual operation. The air volume is 1000-6000m3/h. The filter wind speed, such as 740 filter cloth is 1.2 - 1.8m/min, such as polyester filter material is 2.0-2.8m/min.
structure performance
The dust collector is a kind of air purification equipment with small volume and high dust removal efficiency. It is suitable for various independent dust producing points. It is flexible and convenient. In situ dust collection and on-site treatment can effectively ensure the cleanliness of the air. The basic structure is composed of dust collection box, centrifugal fan, filter bag (filter tube), dust collector and microcomputer controller. Dust is inhaled in the dust collector box through suction pipe by the negative pressure of the fan, and the gravity and upper air flow are used. First, the coarse particle dust is filtered directly to the dust collector, and the particle dust is made by the filter. The trap is collected on the external surface, and clean gas is filtered, decomposed, purified and filtered into the clean room through the filter core, thereby discharging the fan from the outlet. The whole dedusting and filtering process is a result of comprehensive effects of gravity, inertia force, collision, electrostatic adsorption and screen filtration.
Scope of use
Single machine dust remover can be widely used in the medical industry and in situ dust removal in other industries, such as biological, chemical, food, electronic, mechanical hardware, casting, ceramics, loading and unloading, mining, metallurgy and other industries. The dust, cement, gypsum powder, charcoal powder, bakelite powder, plastic powder and so on have good dust removal effect in a certain range. The dust removal efficiency is more than ninety-nine point five percent.
Single Machine Dust Collector
Single Machine Dust Collector,Dust Collector Of Ferrosilicon Furnace,Dust Collector Of Ore Heat Furnace,Boiler Dust Collector
Botou Youjian Environmental Protection Equipment Co. LTD. , http://www.btdustmachine.com