Sinotruk Howo G5X wrecker with crane, one tow two wrecker
Product advantages: adopt domestic hydraulic pump system, which can realize rapid lifting and energy saving. Imported hydraulic valve locks are safer and more reliable, and imported oil cylinder seals are more durable. The telescopic oil cylinder is installed externally and adopts a flange connection method, which improves the service life of the oil cylinder and makes inspection and maintenance work convenient and quick. Using H-shaped outriggers, each outrigger can be adjusted individually to adjust the level of the frame, the outriggers have a large span, and the whole machine has good stability. It can be operated left and right, and can be rotated by 360 degrees in front and back. The imported oil cylinder seal is more durable; the floating three-point bridge can better protect the car beam. Adopt quality production, reliable quality, long life and fast working speed.
[Technical parameters of the vehicle] | |||
Product Trademark | Dongfeng | The number of passengers in the cab (person) | 2,3 |
product name | Wrecker | Dimensions (mm | 9030,9910,10430×2455,2520×2875 |
Curb weight (Kg) | 8500, 9500, 11000 | Total mass (Kg) | 18000 |
Approach angle/departure angle (°) | 19/10 | Front suspension/rear suspension (mm) | 1330/3000, 1330/3380, 1330/3500 |
Axle load (Kg) | 6500/11500 | Maximum speed (Km/h) | 95,89 |
Remarks | 1. The car is used for road vehicle obstacle clearance. The main special devices are flat plate, support arm, winch, steel wire rope and oil cylinder. When there are 2 passengers in the cab, the corresponding relationship of curb weight (kg)/lift weight (kg) is: 8500/9370, 9500/8370, 11000/6870; when there are 3 passengers in the cab, the curb weight (kg) )/Lifting weight (kg) corresponding relationship is: 8500/9305, 9500/8305, 11000/6805. 2. The side protection material adopts Q235 and bolt connection; the rear protection is replaced by a special device, and the lower edge is 500mm above the ground. Optional rear tail plate style, support arm style, and protection style. 3. The ABS system model is XH-KQ4S4M-E01, and the manufacturer is Guangzhou Xihe Automotive Electronic Equipment Co., Ltd.; the model is CM4XL-4S/4M, and the manufacturer is Guangzhou Ruili Komi Automotive Electronics Co., Ltd. Optional white and yellow cab. Optional front cover. | ||
ã€Chassis technical parameters】 | |||
Chassis model | ZZ1187K561DF1Z | Chassis name | Truck chassis |
Trade name | Howo | manufacturer | China National Heavy Duty Truck Group Jinan Commercial Vehicle Co., Ltd. |
Number of axes | 2 | Number of tires | 6 |
Wheelbase (mm) | 3800, 4200, 4500, 4700, 5200, 5600, 6100 | ||
Tire specifications | 10.00R20,275/80R22.5,295/80R22.5 | ||
Number of leaf spring | 1/1+1,2/2+2,3/3+2,3/4+3,11/9+8,11/10+9,8/9+8,3/9+8 | Front track (mm) | 1940, 1980 |
Fuel type | Diesel oil | Rear track (mm) | 1800, 1860 |
Emission standard | GB17691-2018 National â…¥ | ||
engine model | Engine manufacturer | Displacement (ml) | Power (Kw) |
WP4.6NQ220E61 Â | Weichai Power Co., Ltd. Â | 4580 Â | 162 |
support hotline
Chassis configuration: National Six Heavy Duty Truck Volvo G5X yellow card wrecker, Volvo 2250 wide body cab, equipped with Weichai 220 horsepower (4-cylinder), Howo 8-speed gearbox, 4.5 tons front axle 10 tons rear axle, 250 double-layer girder, wheelbase 5600mm, with original adjustment; airbag seat; aluminum alloy fuel tank; LED daytime running lights, lock control center and electric doors and windows+ Remote control key, four-point suspension cab, multi-function steering wheel (including cruise control), color screen instrument, electronically controlled air horn, inner rearview mirror, tire: 275/80R22.5 tubeless tire.
Â
Â
Top configuration: strictly according to the size and appearance of the announcement, others can be customized according to customer requirements, the board is 7 meters long, 2.5 meters wide , 8mm checkered plate , frame 50*150, 8 thick reinforced slides, 8 thick doubles sub-frame, double master cylinder, the bearing holder do girder 8 tons three arms 6 tons hydraulic winch, bilateral linkage, Italy Hyde multi-way valve, a fork, L-type tire rack holding a tire stopper plate 2,.
Optional XCMG crane 8 tons four straight arm, hydraulic, full swing, the seat belt height, automatically closing the hook, extending lift height 13.5 m, 11.8 m working radius.
support hotline
Fittings And Parts Of Crushing Machines
There are several fittings and parts commonly found in crushing machines, including:
1. Jaw Plates: These are the main wear-resistant parts of the crushing machine. They are fixed on the jaw body and provide the crushing surface for the material.
2. Toggle Plates: These plates are connected to the toggle beam and help in adjusting the opening of the crusher. They also protect the machine from overloading.
3. Eccentric Shaft: This is a critical component that provides the rotational motion to the jaw crusher. It is usually made of high-grade forged steel and is responsible for transmitting the crushing force to the material.
4. Flywheel: The flywheel is a heavy metal wheel attached to the eccentric shaft. It helps in maintaining the momentum of the crushing machine and reduces the load fluctuations during the crushing process.
5. Bearings: Bearings are used to support the rotating components of the crushing machine, such as the eccentric shaft and the flywheel. They ensure smooth operation and reduce friction.
6. Crushing Chamber: The crushing chamber is the space between the fixed jaw plate and the movable jaw plate. It is where the actual crushing of the material takes place.
7. Wedges: Wedges are used to adjust the gap between the fixed and movable jaw plates. They help in controlling the size of the crushed material.
8. Springs: Springs are used to provide the necessary force for the jaw plates to return to their original position after crushing the material.
9. Belt and Pulley System: This system is used to transmit power from the motor to the crushing machine. It consists of a belt connected to the motor and pulleys attached to the flywheel and eccentric shaft.
10. Guard Plates: Guard plates are used to protect the crushing machine from damage caused by foreign objects or excessive wear.
electrical crusher fittings, stone crusher fittings, mineral crusher fittings
SiChuan TieYing Machinery Manufacturing CO.,LTD; , https://www.tieyingcrushers.com