Recently, Dongfeng Honda Automobile Co., Ltd. filed a recall plan with the State Administration of Markets in accordance with the Regulations on the Management of Defective Automobile Product Recall and the Implementation Measures for the Management of Defective Automobile Product Recalls, which was decided from May 22, 2018. A total of 130,455 models of CR-V vehicles equipped with 1.5T engines, which were produced from February 14, 2017 to February 27, 2017, were recalled.
Due to design reasons, some vehicles in this recall range will increase the engine oil level when the vehicle continues to travel in a low temperature environment for a short distance. When the oil level increases to a certain level, the engine fault indicator will light up. Continuous operation of the vehicle in the state may cause engine damage and pose a safety hazard. Dongfeng Honda Automobile Co., Ltd. will replace the air conditioning control unit and upgrade the FI-ECU software for the vehicles within the scope of the recall, and replace the radiator lower water pipe assembly and upgrade the TCU software for the vehicle equipped with the CVT gearbox to suppress the increase of the oil level. Eliminate security risks. When the recall is implemented, the engine oil and oil filter are replaced free of charge for the vehicle within the target range, and the engine cleaner is added.
The recall was carried out under the circumstances of the start of the defect investigation by the State Administration of Market Supervision. For some time, the Defective Product Management Center of the State Administration of Markets has received complaints from consumers about this issue. After receiving the complaint, the State Administration of Market Supervision immediately deployed the Defective Product Management Center to conduct a defect investigation and assessment of the above issues. Affected by the investigation, Dongfeng Honda Automobile Co., Ltd. decided to take recall measures to eliminate potential safety hazards. The State Administration of Markets will continue to organize the Defective Product Management Center to conduct key supervision and evaluation of the measures taken in this recall, and request Dongfeng Honda Automobile Co., Ltd. to increase the recall completion rate and strengthen the attitude of being highly responsible to consumers. Monitor the recalled vehicles to protect consumers' rights and interests.
Dongfeng Honda Automobile Co., Ltd. will send the "Defective Automobile Product Recall Notice" to the owner of the vehicle within the scope of the recall by means of a registered letter, etc. The special sales service store of Dongfeng Honda Automobile Co., Ltd. will notify the relevant owner by SMS or telephone. Users can call Dongfeng Honda Automobile Co., Ltd. customer service hotline 800-880-9899 (fixed line), 400-880-6622 (mobile phone, fixed line) for consultation. Users can also visit the Defence Product Management Center of the State Administration of Markets () and the WeChat Public Account (AQSIQDPAC) for more information. In addition, you can also call the National Product Supervision and Administration Administration's Defective Product Management Center hotline to reflect problems during the implementation of the recall or to submit defects.
Mainly installed on the outside of rail passenger cars, mostly large-scale products, the main function is to carry cables, the surface is painted to prevent rust and corrosion, and all parts are connected by welding process or screws, which are firm and strong. The company has many years of industry experience and non-standard systems Design, welcome to map customization.
Jilin Zexin Industrial Development Co., Ltd. was founded in 2001 with a registered capital of 5 million RMB and is a high-tech enterprise in Jilin Province. There are about 100 employees, and the company's sales volume reached 20 million RMB in 2022. The company has more than 30 sets of various equipment including 2 NC laser cutting machines, 6 NC machining centers, 8 welding machines for different purposes, NC cutting machines, NC bending machines and others. After more than 20 years of construction and development, it has formed a comprehensive enterprise of electrical system, carbon steel, stainless steel and aluminum alloy stamping, welding, machining and surface coating. The company has passed the ISO9001:2015 quality management system certification, EN15085 CL1 welding system certification, American standard AWS welding certification, and ISO/TS22163:2017 quality management system certification. It is a high-quality supplier cooperated by CRRC Changchun Railway Vehicles Co., Ltd., the core manufacturer of China's urban rail transit equipment and high-speed train.
Exterior Trunking,Hv Cable Truncking,Track High Voltage Trunking,Car End Cable Trunking
Jilin Zexin Industry Development CO., LTD. , https://www.jilinzexin.com