The fair transport of explosion-proof vehicles must be equipped with transport equipment and handling equipment that ensure safety, and have operational management personnel familiar with the performance of dangerous goods transport vehicles to ensure the safe transportation of dangerous goods transport vehicles. The motor vehicle cargo box should be a wooden roof, so that sparks can be avoided; if an iron roof is used, corresponding liner protection should be used.
Motor vehicle exhaust pipe must have heat insulation and spark extinguishing devices. According to the nature of the loaded dangerous goods transport vehicle, it is equipped with appropriate fire-fighting equipment and devices such as strapping, waterproofing, and anti-dissipation.
Tank (tank) vehicle tank (tank) body material must be compatible with the nature of the loaded goods vehicles, such as: nitric acid using aluminum tanks, waste nitric acid using glass car steel and stainless steel. According to need, equipped with double-channel gates, anti-wave plate, sunshade and other safety devices. Vehicles that transport containers, large cylinders, and movable tanks (cans) must have effective, robust equipment and corresponding cork.
Special transport vehicles and equipment for transporting radioisotopes must comply with the relevant provisions of the department of hygiene and epidemic prevention. Vehicles, equipment, handling tools, and protective equipment should be subject to regular inspections of radioactive contamination, and when pollution intensity exceeds the limit, they must be cleaned and disinfected before continuing to use them. Vehicles transporting dangerous chemicals should not use metal carriages to prevent accidents such as friction and vibration. If necessary, reliable protective measures should be implemented. Barriers to transport vehicles should be solid, stable and reliable to ensure that they do not slip or fall when turning. The loading height of hazardous chemicals must not exceed the height of the vehicle's barrier. The top plate of the carriage should be smooth, dense, and seamless, so that no liquefied dangerous chemicals will leak and contact the drive shaft to prevent friction and fire. When transport vehicles are transporting dangerous chemicals in midsummer, they must have shade measures or other protective measures, or limit night transport. Transport wet flammable materials should be equipped with tarpaulin and other rain-proof equipment.
Transport vehicles shall be equipped with appropriate fire-fighting equipment and protective slow-rescue supplies according to the nature of the dangerous chemicals they have installed for slow use. A 1211, carbon dioxide or dry powder fire extinguisher can usually be hung in the cab or remotely. These fire extinguishing equipment and protective slow-rescue items should be inspected on a regular basis, and leakage, damage, deformation or weight reduction, sound of shaking of the shaft, etc. should be observed. They should be repaired or replaced immediately to ensure that they are in good condition at all times. The special yellow-top and black-headed signal flags with the words "dangerous goods", which are uniformly stipulated by the public security department, shall be hoisted at the front or in the obvious parts of the transport vehicles, and the attention of other vehicles shall be brought to the attention of the noticeable signs. Irrelevant personnel are not allowed to board transport vehicles containing flammable, explosive or highly toxic chemicals. When tank trucks are used to transport flammable liquids, flame arrestors and breathing valves shall be provided at the top of tank trucks; there shall be devices for removing the static tones of Hubei Toshixing Special Vehicles at the top; the fire protection (star) covers shall be reduced for exhaust pipes and should be installed at the front Position (flammable liquid loading and unloading operations are generally at the rear and the positive part of the vehicle); there should be a number of metal plates in the storage tank to make the tank body have sufficient rigidity, and it can reduce the static vibration and friction of the liquid and generate static electricity when the vehicle is running. The vehicle's electrical ignition system should ensure that the contact is good and perfect and prevent electrical sparks from leading the accident. When loading and unloading liquefied petroleum gas by tank truck, in addition to the relevant requirements for tank tank tank inspection, inspection and pressure test, the safety valve, pressure gauge, liquid level gauge, and safety valve shall be installed on the tank body. Flow safety valve, tightly-cut valve, anti-static grounding chain, fire-fighting fire extinguisher, and other fire safety equipment are inspected regularly to ensure that they are in perfect condition at any time.
Yoga resistance band, airavat resistance band, beginner resistance band workout, resistance band arm workout women, resistance band workouts for butt, 30 minute resistance band workout, resistance band tricep extension, tricep resistance band workout, how to use a resistance band, back workout with resistance band, Stretching band, polyester-cotton resistance band, TPE resistance band, latex resistance band
Yoga resistance band, resistance band arm workout women, resistance band workouts for butt, resistance band tricep extension, tricep resistance band workout, Stretching band, polyester-cotton resistance band, TPE resistance band, latex resistance band
Huizhou City Melors Plastic Products Co., Limited , https://www.evafoammaster.com