- Model NO.: DIN137
- Material: Carbon Steel
- Combination Washer Packaging: All Inclusive
- Available Material: Carbon Steel, High Strength Steel, Stainless Steel
- Class/Grade: 3.6, 4.8, 5.6, 6.8, 8.8, 9.8, 10.9, 12.9
- Transport Package: 20-25kg Carton+900kg/Pallet
- Origin: China
- Type: Spring Washer
- Combination Washer Structure: A Type
- Spring Washer Type: Standard
- Surface Finish: Zinc Plated
- Trademark: HN
- Specification: M2-M140
- HS Code: 731815
Product Description:
A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut. Other uses are as a spacer, spring (belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Washers usually have an outer diameter (OD) about twice the width of their inner diameter (ID).
· Washers are usually metal or plastic. High quality bolted joints require hardened steel washers to prevent the loss of pre-load due to Brinelling after the torque is applied.
· Rubber or fiber gaskets used in taps (or faucets, or valves) to stop the flow of water are sometimes referred to colloquially as washers; but, while they may look similar, washers and gaskets are usually designed for different functions and made differently.
Products name | Wave washer | ||||||
Standard: | DIN,ASTM/ANSIÂ JISÂ ENÂ ISO,AS,GB | ||||||
Material | Stainless Steel: SS201, SS303, SS304, SS316,,SS904L | ||||||
Steel Grade:Common and high strength | |||||||
Finishing | Zinc(Yellow,White,Blue,Black),Hop Dip Galvanized(HDG),Black Oxide, Geomet,Dacroment,anodization,Nickel plated,Zinc-Nickel plated |
||||||
 |  | ||||||
Customized Products Lead time |
Busy season:15-30days,Slack seaon:10-15days |
Packing And Delivery
20-25kg Carton+900kg/Pallet
Â
Single blanks are employed to produce parts
or products with deeper shapes. Throughout the Deep Drawing process a metal
blank is shaped via pressure applied by a metal die. The process could stamp
and form stainless steel, brass, bronze, cold rolled steel, aluminum, copper
etc.
Milk bucket is one of the many products
made by deep drawing process. The deep draw process begins with metal blanks. It
could be produced into various capacity, dimension, thickness and surface color.
MSG has more than 10 years of experience in
Sheet Metal Fabrication, deep drawing processing. We`re glad to offer
professional OEM service and technical assistance for you.
Huiye Hardware & Electrical Equipment Company Ltd. , https://www.huiyehardware.com