Scrap Metal Crusher with Large Capacity to Recycle Waste Metal/Aluminum

Scrap Metal crusher with large capacity to recycle waste metal/aluminum

Shredwell metal crusher is aggressively size reduce and densify preshredded material whilst liberating the various different fractions and allowing for better separations and reduced transport costs.It contains a horizontal rotating shaft which hammers are mounted.The hammers are free to swing on the ends of the cross, or fixed to the central rotor.The rotor of metal crusher is spun at a high speed inside the drum while material is fed into a feed hopper.The material is impacted by the hammer bars and is thereby shredded and expelled through screens in the drum of a selected size.Then metal crusher create a product which is both clean and of high bulk density suitable for transportation.


Typical Application:
Electronic Scrap - WEEE Directive Materials
Steel Scrap - Various metal scrap, metal drum, paint bucket, gasoline drum, bicycle, color steel tile, steel sheet etc
Aluminum - Castings, Profiles, UBC's etc.
ELV's (End of Life Vehicles) - Pre-shredded vehicle bodies
SLF (Shredder Light Fraction), ASR (Auto Shredder Residue)


Main Features
Strong welded construction from heavy gauge, wear resistance steel plate.
Durable, wear resistant, replaceable hammers, milling rings and chamber liners in metal crusher
Oversized, spherical rotor bearings with seal protection-prevents bearing damage due to product migration
Stable boot ,low noise,foundation installation
Adjustable product size control
Replaceable wear plates in the chamber of scrap metal drum crusher
Hydraulic open top system to speed up service and maintenance requirement and reduce down time
Stand Alone Electrical Control Panel - using quality Schneider(Telemecanique) components and Siemens PLC's Tested, Approved and Certified to the applicable CE safety standards

1.Technical Specification
 
2.Service

Pre-sale support
*Shredwell is composed of experienced specialists, our sales are engineers too, we will offer a suitable solution according client's requirements in time and 24 hours service is probided.
*On-site inspection

After-sale service
*Production process follow up, on-processing products' pictures and technical report are supplied regularly to make sure the contracted production schedule.
*Shredwell skilled technicians are available to assist with onsite installation, commissioning & training on request.This will enable customers to optimize the performance of their new plant.Customers will be briefed on all aspects relating to operation and maintenance by a Shredwell technician.Dimensional drawings together with service requirements will be provided prior to delivery of the equipment, which make time for our customer to prepare the site and commence production in time.

Technical support
*Shredwell provides enough hardware resource especially for large-scale production lines, clients can carry out installation, commissioning and acceptance before delivery.

3.Company Introdution
Wuxi Shredwell Recycling Technology Co.,Ltd is an integrated enterprise that is committed to developing, designing, manufacturing, selling and installing shredding recycling machinery.Our equipment is based on self-owned intellectual property and has advanced European and American technology.

Shredwell has now been in the shredding and recycling industry for more than 10years.Our engineering team has around 15 years experience in designing and manufacturing tire shredding machine systems.Our workforce has more than 5 years experience in manufacturing shredding machinery.Our company has advanced technologies, an experirenced workforce and excellent innovative management systems designed to manufacture safe, energy-saving, stable and reliable shredding machine systems.

Shredwell is located in Wuxi, China, covering an area of more than thirty thousand square meters, and has a modernized technology center and all kinds of processing and testing equipment with more than 100 experienced staff including over 30 professional engineers.Our main focus is to provide our customers cost-effective tire recycling system, metal recycling system, e-waste recycling system, solid waste recycling system etc.

Our experienced after-sales service team can ensure the most timely installation, testing and training in the customer's workshop.Our mission is to provide our customers the best recycling solutions with high quality service and technology.

Company Introdution

Wuxi Shredwell Recycling Technology Co.,Ltd is an integrated enterprise that is committed to developing, designing, manufacturing, selling and installing shredding recycling machinery. Our equipment is based on self-owned intellectual property and has advanced European and American technology.
 
Shredwell has now been in the shredding and recycling industry for more than 10years. Our engineering team has around 15 years experience in designing and manufacturing tire shredding machine systems. Our workforce has more than 5 years experience in manufacturing shredding machinery. Our company has advanced technologies, an experirenced workforce and excellent innovative management systems designed to manufacture safe, energy-saving, stable and reliable shredding machine systems.
 
Shredwell is located in Wuxi, China, covering an area of more than thirty thousand square meters, and has a modernized technology center and all kinds of processing and testing equipment with more than 100 experienced staff including over 30 professional engineers. Our main focus is to provide our customers cost-effective tire recycling systems ranging from TDS system(50-100mm output chips), TSM system(20mm output wire free chips), TSC system(1-5mm rubber crumb), TSP system(30-120mesh rubber powder)
 
Our experienced after-sales service team can ensure the most timely installation, testing and training in the customer's workshop. Our mission is to provide our customers the best recycling solutions with high quality service and technology.



Professional fully automatic scrap metal shredder supplier: Shredwell recycling.
  Scrap Metal crusher with large capacity to recycle waste metal/aluminum

Shredwell metal crusher is aggressively size reduce and densify preshredded material whilst liberating the various different fractions and allowing for better separations and reduced transport costs.It contains a horizontal rotating shaft which hammers are mounted.The hammers are free to swing on the ends of the cross, or fixed to the central rotor.The rotor of metal crusher is spun at a high speed inside the drum while material is fed into a feed hopper.The material is impacted by the hammer bars and is thereby shredded and expelled through screens in the drum of a selected size.Then metal crusher create a product which is both clean and of high bulk density suitable for transportation.


Typical Application:
Electronic Scrap - WEEE Directive Materials
Steel Scrap - Various metal scrap, metal drum, paint bucket, gasoline drum, bicycle, color steel tile, steel sheet etc
Aluminum - Castings, Profiles, UBC's etc.
ELV's (End of Life Vehicles) - Pre-shredded vehicle bodies
SLF (Shredder Light Fraction), ASR (Auto Shredder Residue)


Main Features
Strong welded construction from heavy gauge, wear resistance steel plate.
Durable, wear resistant, replaceable hammers, milling rings and chamber liners in metal crusher
Oversized, spherical rotor bearings with seal protection-prevents bearing damage due to product migration
Stable boot ,low noise,foundation installation
Adjustable product size control
Replaceable wear plates in the chamber of scrap metal drum crusher
Hydraulic open top system to speed up service and maintenance requirement and reduce down time
Stand Alone Electrical Control Panel - using quality Schneider(Telemecanique) components and Siemens PLC's Tested, Approved and Certified to the applicable CE safety standards

1.Technical Specification
 
2.Service

Pre-sale support
*Shredwell is composed of experienced specialists, our sales are engineers too, we will offer a suitable solution according client's requirements in time and 24 hours service is probided.
*On-site inspection

After-sale service
*Production process follow up, on-processing products' pictures and technical report are supplied regularly to make sure the contracted production schedule.
*Shredwell skilled technicians are available to assist with onsite installation, commissioning & training on request.This will enable customers to optimize the performance of their new plant.Customers will be briefed on all aspects relating to operation and maintenance by a Shredwell technician.Dimensional drawings together with service requirements will be provided prior to delivery of the equipment, which make time for our customer to prepare the site and commence production in time.

Technical support
*Shredwell provides enough hardware resource especially for large-scale production lines, clients can carry out installation, commissioning and acceptance before delivery.

3.Company Introdution
Wuxi Shredwell Recycling Technology Co.,Ltd is an integrated enterprise that is committed to developing, designing, manufacturing, selling and installing shredding recycling machinery.Our equipment is based on self-owned intellectual property and has advanced European and American technology.

Shredwell has now been in the shredding and recycling industry for more than 10years.Our engineering team has around 15 years experience in designing and manufacturing tire shredding machine systems.Our workforce has more than 5 years experience in manufacturing shredding machinery.Our company has advanced technologies, an experirenced workforce and excellent innovative management systems designed to manufacture safe, energy-saving, stable and reliable shredding machine systems.

Shredwell is located in Wuxi, China, covering an area of more than thirty thousand square meters, and has a modernized technology center and all kinds of processing and testing equipment with more than 100 experienced staff including over 30 professional engineers.Our main focus is to provide our customers cost-effective tire recycling system, metal recycling system, e-waste recycling system, solid waste recycling system etc.

Our experienced after-sales service team can ensure the most timely installation, testing and training in the customer's workshop.Our mission is to provide our customers the best recycling solutions with high quality service and technology.

Company Introdution

Wuxi Shredwell Recycling Technology Co.,Ltd is an integrated enterprise that is committed to developing, designing, manufacturing, selling and installing shredding recycling machinery. Our equipment is based on self-owned intellectual property and has advanced European and American technology.
 
Shredwell has now been in the shredding and recycling industry for more than 10years. Our engineering team has around 15 years experience in designing and manufacturing tire shredding machine systems. Our workforce has more than 5 years experience in manufacturing shredding machinery. Our company has advanced technologies, an experirenced workforce and excellent innovative management systems designed to manufacture safe, energy-saving, stable and reliable shredding machine systems.
 
Shredwell is located in Wuxi, China, covering an area of more than thirty thousand square meters, and has a modernized technology center and all kinds of processing and testing equipment with more than 100 experienced staff including over 30 professional engineers. Our main focus is to provide our customers cost-effective tire recycling systems ranging from TDS system(50-100mm output chips), TSM system(20mm output wire free chips), TSC system(1-5mm rubber crumb), TSP system(30-120mesh rubber powder)
 
Our experienced after-sales service team can ensure the most timely installation, testing and training in the customer's workshop. Our mission is to provide our customers the best recycling solutions with high quality service and technology.



Professional fully automatic scrap metal shredder supplier: Shredwell recycling.