Lab Mini Soft Capsule Making Machine

Specifications

1.Mini Soft-capsule production line 
2.Small size 
3.PLC touch screen 
4.Meet GMP Standard 

SRJ-5 Small Soft Capsule Making Machine  the requirements of GMP standard. It is a simple and efficient laboratory machine mainly for R&D or small batch production of gelatin capsule products in laboratories or pharmaceutical researching institutes.
The whole set of the equipment is simple and efficient with small occupation. It includes a main machine. Control system, water-cooling system lubrication oil saving system, a dryer, a set of mould, as well as an auxiliary HTG-II Gelatin Dissolving Unit. All the materials for the whole set of the equipment are well selected to meet the GMP requirements, making it applicable for medical, food and cosmetic industries.

The main machine

 

The main machine is the center of the soft gelatin encapsulation machine, whose function is to simultaneously finish the preparation of the gelatin ribbon, quantitative feeding of the content (liquid or sticky materials ). And packing to form the pills.
 

Technical parameters

 

Output : 4000granule/hour(500mg)
Charge variance: ±2%
Single plunger charge: 0-1.5ml
Size of the die roller: 64x75mm
Rotational speed of the die roller: 0-4rpm infinitely variable speed 
Power of the main motor: 0.75kw 
Power of the main machine: 1.8kw
Power supply: 220v, 50hz 
Overall dimension: 1240x620x1250mm(Lx Wx H)
10.Weight: 300kg

 

Tumble size: 330x460mm

 Power of the motor: 220v 90w

 Power of the motor: 220v 180w

 Tumble rotating rate: 12rpm

 Overall dimension (LxWxH ): 1120x50x510mm

 Weight: 70kg

The dryer

 

The dryer consists of a one section tumble and one fans. Through adjusting the direction of the tumble, the gelatin capsules can be maintained in it fo drying or be discharged. The dryer is mainly for the forming and drying in soft gelatin capsule production.

 

 

 

Specifications

1.Mini Soft-capsule production line 
2.Small size 
3.PLC touch screen 
4.Meet GMP Standard 

SRJ-5 Small Soft Capsule Making Machine  the requirements of GMP standard. It is a simple and efficient laboratory machine mainly for R&D or small batch production of gelatin capsule products in laboratories or pharmaceutical researching institutes.
The whole set of the equipment is simple and efficient with small occupation. It includes a main machine. Control system, water-cooling system lubrication oil saving system, a dryer, a set of mould, as well as an auxiliary HTG-II Gelatin Dissolving Unit. All the materials for the whole set of the equipment are well selected to meet the GMP requirements, making it applicable for medical, food and cosmetic industries.

The main machine

 

The main machine is the center of the soft gelatin encapsulation machine, whose function is to simultaneously finish the preparation of the gelatin ribbon, quantitative feeding of the content (liquid or sticky materials ). And packing to form the pills.
 

Technical parameters

 

Output : 4000granule/hour(500mg)
Charge variance: ±2%
Single plunger charge: 0-1.5ml
Size of the die roller: 64x75mm
Rotational speed of the die roller: 0-4rpm infinitely variable speed 
Power of the main motor: 0.75kw 
Power of the main machine: 1.8kw
Power supply: 220v, 50hz 
Overall dimension: 1240x620x1250mm(Lx Wx H)
10.Weight: 300kg

 

Tumble size: 330x460mm

 Power of the motor: 220v 90w

 Power of the motor: 220v 180w

 Tumble rotating rate: 12rpm

 Overall dimension (LxWxH ): 1120x50x510mm

 Weight: 70kg

The dryer

 

The dryer consists of a one section tumble and one fans. Through adjusting the direction of the tumble, the gelatin capsules can be maintained in it fo drying or be discharged. The dryer is mainly for the forming and drying in soft gelatin capsule production.

 

 

 

Batch Waste Plastic Pyrolysis Plant

Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.

Flow-chat of Batch Waste Plastic Pyrolysis Plant

 

Advantages of Batch Waste Plastic Pyrolysis Plant

 

1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.

2.  Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.

3.  National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.

4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.

5.  Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.

6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.

7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.

8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.

 

Technical Parameter of Batch Waste Plastic Pyrolysis Plant

NO.	ITEM	PROJECT
1	Equipment Model	XY-7	XY-8
2	Door Model	Full Open Door	Full Open Door
3	Suitable Raw Materials	Rubber/Plastic Products	Rubber/Plastic Products
4	Structure	Horizontal Type Revolves	Horizontal Type Revolves
5	Reactor Size	Φ2200*6000mm  Î¦2600*6600mm	Φ2200*6000mm  Î¦2600*6600mm
6	Capacity for One Batch	5-6Mt; 8-10Mt	5-6Mt; 8-10Mt
7	Oil Yield of Tires	40%-45%	40%-45%
8	Work Pressure	Normal Pressure	Normal Pressure
9	Reactor Rotation Speed	0.4R/M	0.4R/M
10	Fuels Choice	Coal, Wood	Coal, Wood, Gas, Oil
11	Power	18KW/H	18-25KW/H
12	Cooling Method	Water Cycling	Water Cycling
13	Type of Drive	External Annular Gear	External Annular Gear
14	Heating Method	Direct	Direct
15	Type of Installation	With Foundation	With Foundation/Integrated Base
16	Noise dB(A)	≦85	≦85
17	Operation Mode	Intermittent Operation	Intermittent Operation
18	Total Weight(MT)	25-40	25-40
19	Installation Space Required	30m*10m	30m*10m
20	Manpower	3~4/batch	3~4/batch
21	Shipment	Ф2200×6000=1*40HC+1*40FR Ф2600×6600=2*40HC+1*40FR	Ф2200×6000=1*40HC+1*40FR Ф2600×6600=2*40HC+1*40FR

 

Batch Waste Plastic Pyrolysis Plant

Batch Waste Plastic Pyrolysis Plant,Fuel From Plastic Waste,Plastic To Oil Machine

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl