200 Mircon Online Baclwashing/ Self-Cleaning Stainless Steel Water Strainer

Model NO.: YLF-250
Material: Carbon Steel/Stainless Steel
Working Pressure: Less Than 1.0 MPa
Working Temperature: Less Than 100centigrade
Pressure Loss: Less Than 0.015MPa
Filtering Precision: 100-3000 Micron
Interface: Flange
Flow Rate: 280 M3/H
Inlet and Outlet Diameter: 10 Inch
Drian: 3 Inch
Trademark: YLD
Specification: CE, SGS
Origin: Jiangyin, Jiangsu
HS Code: 8421219990
Model NO.: YLF-250
Material: Carbon Steel/Stainless Steel
Working Pressure: Less Than 1.0 MPa
Working Temperature: Less Than 100centigrade
Pressure Loss: Less Than 0.015MPa
Filtering Precision: 100-3000 Micron
Interface: Flange
Flow Rate: 280 M3/H
Inlet and Outlet Diameter: 10 Inch
Drian: 3 Inch
Trademark: YLD
Specification: CE, SGS
Origin: Jiangyin, Jiangsu
HS Code: 8421219990
200 Mircon Online Baclwashing/ Self-cleaning Stainless Steel Water Strainer 

Design feature of the multi— Core self— Cleaning filter
1. The filter takes the internal mechanical structure of self-cleaning to realize the backwashing function in the true sense. It could clean the impurity on the strainer thoroughly. There is no dead angle for washing and no flux attenuation so that the filtering efficiency and the service life are assured.
2. The filter takes the wedge strainer of 304, 316L stainless steel with high strength, precision and corrosion resistance. The filtering precision is 251im.
3. The filter with few wearing parts, no consumable, low maintenance cost. The operation and management are simple.
4. The control system of the filter is with sensitive response and precise operation. The backwashing pressure difference and the time could be adjusted flexibly according to the different water source and filtering precision.


Introduction 

Self clean filter has metal filter cartridges inside. When filter elements clogged, a specially designed back-flushing arm will clean the elements one by one. When filtering, the water enters the element from both ends. When self-cleaning, the top end partly opens and the water flushed out of the bottom end.

Self clean filter has very large filter area, high flowrate, compact structure and high reliability and works better for high flowrate and dirty water filtration applications. self clean filter has tow sub-series: M Series, for the low flowrate or filtration at rating > 300 μm. S Series, for the filtration at rating < 300 μm. Single filter flowrate range is 5~3000 m3/h. The inlet and outlet nozzle range is 2"~24". 

Self clean filter is capable to remove the solid particles from water and low viscosity liquid (metal working coolant for example). Filter makes the fluid meet the cleanness requirement and protects the downstream key equipment from clogging, abrasing and fouling. It increases the key equipment running efficiency and service life. Series self clean filter automatically works continuously on-line; it reduces the downtime cost, maintenance cost and labor cost.  Series self clean filter is an ideal solution for water and low viscous liquid self-cleaning filtration.


Working Principle
 [ Filtering ] Liquid flows into the filter via the inlet, part of liquid flows directly through filter elements from the lower ends; another part of liquid flows through the distribution pipe and into the upper part of the filter and then flows into the filter elements from the upper and lower ends at the same time,and then flows through the internal surface of filter element and goes out from the outlet. Impurities are intercepted by the elements and the filter cake slowly accumulates, which leads to gradually pressure drop increasing between the inlet and outlet. It indicates that the filter cake reaches certain thickness,and the flux of filter element becomes lower  


[ Back-flushing ] When the preset pressure drop or time exceeds, the self-cleaning program is triggered. The gear motor drives the cleaning arm to aim at one element to partly cap the upper end of the element and connect its lower end to the cleaning nozzle. And then the cleaning valve opens and connect the element and discharging pipe. the differential pressure between the element's outside and discharging nozzle will make the filtrate back-flush the filter element, filter cake dislodged and be purged downward into the sewage pipe. After one element cleaned, the cleaning valve closes and the cleaning arm aims at the next one. When all filter elements cleaned, the entire back-flushing sequences are completed.
 

Model
Flow
(T/h)
Inlet and outlet diameter
(mm)
Drainage diameter
(mm)
D
(mm)
H
(mm)
H1
(mm)
H2
(mm)
YLF-50 70 DN50 DN50 300 1690 265 640
YLF-80 80 DN80 DN50 350 1720 265 660
YLF-100 120 DN100 DN50 400 1760 265 680
YLF-200 200 DN200 DN80 500 1860 290 715
YLF-250 280 DN250 DN80 600 1930 290 755
YLF-300 450 DN300 DN100 700 2040 335 755
YLF-350 600 DN350 DN100 800 2105 335 770
YLF-400 800 DN400 DN100 1000 2220 335 800
YLF-500 1000 DN500 DN100 1200 2360 365 825

FAQ:
 
01. What is the capacity (m3/hour)you required for this equipment?
02. What is the material for this filter?
Carbon steel ?or stainless steel (SS304/SS316)?
03. What is the filtration degree?
10 micron or 200 micron?
04. What is the power supply in your country?
220V/60Hz or other? 200 Mircon Online Baclwashing/ Self-cleaning Stainless Steel Water Strainer 

Design feature of the multi— Core self— Cleaning filter
1. The filter takes the internal mechanical structure of self-cleaning to realize the backwashing function in the true sense. It could clean the impurity on the strainer thoroughly. There is no dead angle for washing and no flux attenuation so that the filtering efficiency and the service life are assured.
2. The filter takes the wedge strainer of 304, 316L stainless steel with high strength, precision and corrosion resistance. The filtering precision is 251im.
3. The filter with few wearing parts, no consumable, low maintenance cost. The operation and management are simple.
4. The control system of the filter is with sensitive response and precise operation. The backwashing pressure difference and the time could be adjusted flexibly according to the different water source and filtering precision.


Introduction 

Self clean filter has metal filter cartridges inside. When filter elements clogged, a specially designed back-flushing arm will clean the elements one by one. When filtering, the water enters the element from both ends. When self-cleaning, the top end partly opens and the water flushed out of the bottom end.

Self clean filter has very large filter area, high flowrate, compact structure and high reliability and works better for high flowrate and dirty water filtration applications. self clean filter has tow sub-series: M Series, for the low flowrate or filtration at rating > 300 μm. S Series, for the filtration at rating < 300 μm. Single filter flowrate range is 5~3000 m3/h. The inlet and outlet nozzle range is 2"~24". 

Self clean filter is capable to remove the solid particles from water and low viscosity liquid (metal working coolant for example). Filter makes the fluid meet the cleanness requirement and protects the downstream key equipment from clogging, abrasing and fouling. It increases the key equipment running efficiency and service life. Series self clean filter automatically works continuously on-line; it reduces the downtime cost, maintenance cost and labor cost.  Series self clean filter is an ideal solution for water and low viscous liquid self-cleaning filtration.


Working Principle
 [ Filtering ] Liquid flows into the filter via the inlet, part of liquid flows directly through filter elements from the lower ends; another part of liquid flows through the distribution pipe and into the upper part of the filter and then flows into the filter elements from the upper and lower ends at the same time,and then flows through the internal surface of filter element and goes out from the outlet. Impurities are intercepted by the elements and the filter cake slowly accumulates, which leads to gradually pressure drop increasing between the inlet and outlet. It indicates that the filter cake reaches certain thickness,and the flux of filter element becomes lower  


[ Back-flushing ] When the preset pressure drop or time exceeds, the self-cleaning program is triggered. The gear motor drives the cleaning arm to aim at one element to partly cap the upper end of the element and connect its lower end to the cleaning nozzle. And then the cleaning valve opens and connect the element and discharging pipe. the differential pressure between the element's outside and discharging nozzle will make the filtrate back-flush the filter element, filter cake dislodged and be purged downward into the sewage pipe. After one element cleaned, the cleaning valve closes and the cleaning arm aims at the next one. When all filter elements cleaned, the entire back-flushing sequences are completed.
 

Model
Flow
(T/h)
Inlet and outlet diameter
(mm)
Drainage diameter
(mm)
D
(mm)
H
(mm)
H1
(mm)
H2
(mm)
YLF-50 70 DN50 DN50 300 1690 265 640
YLF-80 80 DN80 DN50 350 1720 265 660
YLF-100 120 DN100 DN50 400 1760 265 680
YLF-200 200 DN200 DN80 500 1860 290 715
YLF-250 280 DN250 DN80 600 1930 290 755
YLF-300 450 DN300 DN100 700 2040 335 755
YLF-350 600 DN350 DN100 800 2105 335 770
YLF-400 800 DN400 DN100 1000 2220 335 800
YLF-500 1000 DN500 DN100 1200 2360 365 825

FAQ:
 
01. What is the capacity (m3/hour)you required for this equipment?
02. What is the material for this filter?
Carbon steel ?or stainless steel (SS304/SS316)?
03. What is the filtration degree?
10 micron or 200 micron?
04. What is the power supply in your country?
220V/60Hz or other?

Quick Details



Place of Origin:Zhejiang, China (Mainland)

Brand Name:Hanray

Warranty:1 Years

OE NO.:4L0698007, 4L0698007A

Size:OEM Standard

Warranty:12 Months

Application:Auto Suspension Parts

Product name:7L0698007

Car Make:for Audi Porsche Cayenne VW Touareg

Model Number:4L0698007, 4L0698007A

Type:Air compressor

Packaging & Delivery

Packaging Details:Neutral box or as customers' request

Delivery Time:Shipped in 7 days after payment

Air Compressor suspension for Audi 4L0698007, 4L0698007A, 7L8616006, 7L8616006A,95535890104, 95535890105 7L0698007

Product Description

Car Make

for AUDI Q7 PORSCHE CAYENNE VOLKSWAGEN TOUAREG 

OE No.


4L0698007A, 7L8616006, 7L8616006A,95535890104, 95535890105 7L0698007

Brand

FAT

MOQ

1pc

Size

Standard 

Certificate

German Rhine,TS16949 and ISO9001

Warranty

12 Months

Payment Terms

T/T, Western union, Paypal,Alipay 

Shipping Terms

DHL,UPS,Fedex,EMS,by sea,etc

Delivery Time

1-4 working days after the receipt of the payment

Packaging

Neutral packing and accept customer's special packaging demand.

Our advantages

Factory directly sale,high quality and competitive price.Professional 

in the manufacture of air suspension

Type

Air Suspension Bellow , Air spring , Air shock sbsorber , Air suspension , 

suspension pneumatique , Damper, air suspension repair kits ,Auto Parts

 

 

OEM NO. 95535890104, 95535890105, 95535890101

               7L8616006, 7L8616006A, 7L0698007 

               4L0698007, 4L0698007A, 4L0698007B



Air Compressor for Audi

Air Compressor For Audi,Air Suspension Compressor For Audi,Mini Compressor For Audi,Air Pump For Audi

Hangzhou Hanray Industry Co., Ltd , https://www.airsuspensionride.com